Elevate Solutions Group Announces New Leadership in Medical Device Injection Molding

Part one in a series: Meet the Team A one-on-one interview with Jim Casavant, Lead Tooling Manager

AUSTELL, GA, UNITED STATES, February 12, 2026 /EINPresswire.com/ -- Interviewer: Chris Gardner, VP of Sales & Marketing
Interviewee: Jim Casavant, Lead Tooling Manager

Gardner: You’ve spent decades supporting medical device programs. How does medical industry tooling differ from tooling in less regulated industries?
Casavant: Medical tooling requires a more stringent choice of steels and coatings on surfaces that touch the molded part. Often, the part will be molded in a clean room requiring no grease, and graphite impregnated bushings may be required. Pay close attention to tolerances and drafts on wear surfaces, gate location, vent depths, and critical dimensions.

Gardner: From your perspective, how is Elevate Solutions Group positioned to meet these demands and what actions are you taking to ensure we are performing at the highest levels?
Casavant: Many suppliers will refer to themselves as “cradle to grave”. But at Elevate Solutions Group we are often asked to take on projects earlier. I like to say, “from the womb; before the cradle!” We want to be involved in the CAD for the initial design to help our customer achieve the best part, including mold design, manufacturing, and assembly success.

Gardner: We anticipate our ISO 13485 certification to be complete by mid-year. How does this influence tooling related issues? Can you tell us about a situation where your customer solution, guided by these quality management system requirements, resulted in vastly improved outcomes?
Casavant: ISO 13485 is a proven tool that is critical in asset protection. This certification includes mold preventive maintenance (PM) which requires production and tooling adhere to a schedule based on mold shots. Under this system, some molds normally on a 200,000-shot PM cycle are shortened to 100,000 shots. Building and tracking this shorter schedule has been proven to save the customer money - both in mold repairs and catastrophic failure.
Molds are our customers’ assets and Elevate Solutions Group is tasked with protecting them. We recently advised a customer with a tool transfer that routine PM schedules would be part of their program. Not being part of their previous experience, it gave them peace of mind knowing their parts would always be produced by tools maintained to operate optimally.


Gardner: At Elevate Solutions Group, we have made a point of staffing our leadership team with experienced designers, engineers, and quality experts. How important are early tooling discussions to medical OEMs?
Casavant: Our staff understands the DFM process and what it takes to enable a successful product launch. Following a product design review, we want to understand each part’s function, how it will be assembled, and what its performance expectations are in the field. This guides us to focus on critical dimensions for part use and assembly. The mold designer uses this information to make certain areas of the mold steel safe, so we can groom in a close tolerance dimension. Process engineers develop the best process window, and the steel is groomed to that window.

Gardner: Medical customers often require long product lifecycles. What is your approach to designing tools that can perform consistently over many years?
Casavant: Elevate Solutions Group can build a Class 101 mold using the best steel - and coatings if required. With every design we do a mold flow analysis to understand how the plastic will travel through the mold at production. This information is used to make sure mold components have adequate support to withstand the pressures they will be subjected to in the press. We also ensure the mold has adequate water, gas traps, and flow lines so we can add vents in the right locations. These efforts can give the customer a nice win; years of additional and reliable performance for their mold/asset.

Gardner: What should medical OEMs look for in a molding partner’s tooling team when qualifying a new supplier?
Casavant: OEMs should consider the successful projects that have been kicked off and maintained in production. They should ask about the quality standards and tooling and production maintenance programs that keep the molds and molding machines operating in peak condition.
Elevate Solutions Group has this experience in-house. Team members understand these requirements and are always happy to share their knowledge with the customer.

Gardner: How does close collaboration between tooling, engineering, QA, and our manufacturing teams improve predictability for medical customers?
Casavant: Our team of tooling engineers, process engineers, building maintenance, and quality engineers each bring their unique knowledge to help solve any challenges that may arise. We are a close-knit family and always willing to brainstorm ways to help improve the process so we can continually deliver the best quality part to our customer.

Gardner: Since joining Elevate Solutions Group last year, you have completely redesigned the tool shop, purchased new equipment, and established new rules and guidelines related to how customer molds are maintained and serviced. What is your vision for the company as we address the growing demands of our medical customers?
Casavant: The tooling area is an important part of the company’s effort to help support production and customer needs. With tooling capabilities in-house, we can build a history for each mold and understand the needs of each mold. We can maintain more machine uptime production hours to ensure on-time delivery of customer orders. Recently added new equipment and technologies enable us to respond quicker to engineering changes and tool repairs.

About Elevate Solutions Group
Elevate Solutions Group is a rapidly growing, vertically integrated contract manufacturer serving medical, telecommunications, consumer, and industrial markets from its modern campus just outside Atlanta in Austell, Georgia. With more than 30 injection molding presses ranging from 80–950 tons and 240,000+ square feet of ISO 9001-certified, FDA registered operations, ESG delivers its’ customer centric focus in precision molding, packaging & assembly, kitting, warehousing, and full 3PL services. Capabilities include designing, engineering, producing, and assembling complex products as well as holding stock, and shipping globally through a data-driven distribution center. Visit www.esgworks.com for more information.

Christopher Gardner
Elevate Solutions Group
+ +1 585-414-3116
email us here
Visit us on social media:
LinkedIn

Legal Disclaimer:

EIN Presswire provides this news content "as is" without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the author above.